Plan 65600BS

Fabulous Mediterranean Home Plan

Name: Plan 65600BS: Fabulous Mediterranean Home Plan
Brand: Architectural Designs
SKU: 65600BS
Price: 3638.0 USD
Availability: InStock

Heated S.F.

3,638

Beds

Baths

3.5

Stories

Cars

Floor Plan

Main Level

Plan Details

Artfully done with an over-sized shutter in front, this fabulous Mediterranean home plan has a well-laid out floor plan.
Amenities such as special ceiling treatments and a large wet bar make this an impressive home.
The open floor plan encourages easy movement from room to room and either double doors or sliding glass doors lead to the spacious covered lanai in the rear.
A bay window in the deluxe master suite carves out a cozy sitting area.
The master bath is huge and luxurious with both an enormous walk-in shower and a soaking tub.
The kitchen has tons of counter space and an eating bar where friends can sit and chat while you are cooking.
Golf cart storage in the two car garage is built right in.
BUILDING RESTRICTION: Restrictions may apply if building in Lee and Collier Counties, Florida as well as Sarasota, Florida. Please contact us with your site address to confirm.

What's Included

Elevations: - Drawn at 1/8″ to 1/4″ = 1’0″ Scale and Includes:

Material Labels
Floor-To-Floor Heights
Roof Slope Indicators

Floor Plans: - Drawn at 1/8″ to 1/4″ = 1’0″ Scale and Includes:

Door and Window Sizes
Completely Dimensioned Floor Plan
Room Labels and Interior Room Sizes

Electrical Layouts:

Building Section Markers
All Electrical Outlets, Fixtures and Switching

Foundation or Slab Plan: - Drawn at 1/8″ to 1/4″ = 1’0″ Scale and Includes:

Floor and Deck Joist Sizes, Spacing and Direction
Electrical Locations

Roof Design Plan: - Drawn to 1/8″ to 1/4″ = 1’0″ Scale and Includes:

All Beam and Header Heights and Locations
All Hips, Gables, Ridges and Valley
Building Section Markers

Building Sections: - Drawn to 1/8″ to 1/4″ = 1’0″ Scale and Includes:

Floor-To-Floor Heights
Non-Typical Plate Heights Indicated

Typical Wall Sections: - Drawn at 1/8″ to 1/2″ = 1’0″ Scale and Includes:

All Labels Indicating Wall Construction
Foundation Wall Thickness
Insulation Type and Thickness

Miscellaneous Notes and Details:

Miscellaneous General Notes
Stairway Details (if applicable)

What's Not Included

Architectural or Engineering Stamp - handled locally if required
Site Plan - handled locally when required
Mechanical Drawings (location of heating and air equipment and duct work) - your subcontractors handle this
Plumbing Drawings (drawings showing the actual plumbing pipe sizes and locations) - your subcontractors handle this
Energy calculations - handled locally when required

IMPORTANT NOTE: Structural drawings, as well as heating and plumbing details, will not be included in your plan sets due to a variety of factors which include local codes, installation methods, personal preference, etc. Your building professional (contractor/builder/supplier) can, without difficulty, supply these details and specifications on your behalf.