Each plan set includes the following:
- Cover Sheet -The cover sheet features an elevation of the home, sheet number index for the plan,
and contact information.
- Foundation -
These drawings will detail and illustrate the foundation of the home, exterior
and interior footings to support the floors and structure above. If a
basement is purchased, it will show the stairs, bearing walls, and basement
windows and doors.
- First Floor Plan -
This page is drawn to 1/4”=1’-0” scale and includes exterior dimensions to
build the home. The notes are precise directions for your builder.
Important features such as built-ins, niches, and appliances are noted.
Doors and windows are identified and specific sizing can be found on window and
door schedules. Conventional framing.
- Second Floor Plan -
The second floor includes stair details. Often the reflective roof detail
is shown legibly over the second floor plan. This is helpful for the
framing contractor.
- Lighting and Electrical -
On this sheet you have a schematic of the lights, electrical plugs, phone
location, and code items such as smoke detectors. It is common place to
build with your builder and/or electrician before the work starts to review
this plan. Careful planning can make your home special and convenient for
your family.
- Second Floor Lighting -
The same details as provided for the first floor.
- Front and Rear Elevations -
The front and rear elevations may be on separate pages depending on the size of
the house. This page comes with exterior dimensions and notes required to
complete construction. This is where the windows, doors, and interior
trim details are illustrated, as well as wall heights, roof pitches and ridge
heights.
- Right and Left Elevations -
The right and left elevations provide the same details as the front and rear
elevations.
- Roof Plan -
This drawing, usually at 1/4”=1’-0” scale, will be a bird’s eye view of the
home. It will show the ridges, hips, and valleys. This page will
show a beautifully designed roof.
- Cross-Sections -
Sections are used to further describe any architectural intent necessary for
the builder or framer. This drawing will illustrate important changes in the
floor, ceiling, and roof heights.
- Cabinet Elevations -
Cabinet elevations are provided with your plans, and like the electrical plan,
they are mainly a guide for estimating purposes. Cabinets are an area
that is easy to customize and your builder or cabinet maker will work with you
early on in the process to ensure that the correct cabinets are
specified. After framing and sheet rock installation sizes of walls may
change slightly. The cabinet maker must take as built measurements to
properly size your cabinets. **NOTE:
Most house plans will contain interior/cabinet elevations, however not all
plans will. Please inquire prior to purchase.
. Need less space? Save money with these four bedroom house plans - 12150JL (2,870 sq. ft.) and 12004JL (2,707 sq. ft.).)
Purchase Options
