Split-Bedroom Design

Plan 40123WM

  • 2,544

    Heated s.f.

  • 3-4

    Beds

  • 3

    Baths

  • 1

    Stories

  • 3

    Cars

  • The split-bedroom design of this one-level home places two family bedrooms and a game room on one side. The master suite and study or fourth bedroom are placed on the other side.
  • A corner fireplace warms the living room, which is set off by interior columns.
  • The kitchen is well-situated to serve both the eating nook and the formal dining room. A walk-in pantry and serving area add convenience.
  • The master suite and the study/bedroom have private baths, while bedrooms three and four share the third bath.
  • Walk-in closets are found in all the bedrooms.
  • Foundation: slab.

  • Front elevation and construction notes
  • Rear and side elevations
  • Floor plan including electrical, window and door sizes, floor joist span direction and ceiling type notes (9' ceiling, vault, etc.)
  • Second floor plan (if applicable) with the same details as the first level floor plan
  • Typical wall section
  • Typical foundation details
  • Roof plan showing roof pitches, ridges and valleys, noted as 2" x 8" rafter or optional roof trusses
  • Foundation plan
  • Most plans have an optional full building section--only available upon request--at no extra cost.  This section is not typically required in the US but can be a requirement in Canada


These items are NOT included:

  • Architectural or Engineering Stamp - handled locally if required
  • Site Plan - handled locally when required
  • Mechanical Drawings (location of heating and air equipment and duct work) - your subcontractors handle this
  • Plumbing Drawings (drawings showing the actual plumbing pipe sizes and locations) - your subcontractors handle this
  • Energy calculations - handled locally when required

Floor Plan

NOTE:
If you want to purchase this plan in reverse, please select "readable reverse" or "mirror reverse" under Options above.
Split-Bedroom Design - 40123WM floor plan - Main Level

Plan details

Split-Bedroom Design

  • 2,544

    Heated s.f.

  • 3 - 4

    Beds

  • 3

    Baths

  • 1

    Floors

  • 3

    Car garage

Buy This Plan
  • PDF - Unlimited Build $1,055
  • CAD - Unlimited Build $1,350
  • View all purchase option online

About This Plan

  • The split-bedroom design of this one-level home places two family bedrooms and a game room on one side. The master suite and study or fourth bedroom are placed on the other side.
  • A corner fireplace warms the living room, which is set off by interior columns.
  • The kitchen is well-situated to serve both the eating nook and the formal dining room. A walk-in pantry and serving area add convenience.
  • The master suite and the study/bedroom have private baths, while bedrooms three and four share the third bath.
  • Walk-in closets are found in all the bedrooms.
  • Foundation: slab.

Floor Plans

  • Main Level

Plan Details

Square Footage Breakdown

  • Total Heated Area: 2,544 sq. ft.
  • 1st Floor: 2,544 sq. ft.
  • Porch, Rear: 244 sq. ft.

Beds/Baths

  • Bedrooms: 3 or 4
  • Full bathrooms: 3

Foundation Type

    • Standard Foundations: Slab
    • Optional Foundations: Basement, Crawl

Exterior Walls

  • Standard Type(s): 2x4
  • Optional Type(s): 2x6

Dimensions

  • Width: 69' 0"
  • Depth: 62' 0"
  • Max ridge height: 27' 0"

Garage

  • Type: Attached
  • Area: 638 sq. ft.
  • Count: 3 Cars
  • Entry Location: Side

Ceiling Heights

  • Floor / Height: First Floor / 9' 0"

Roof

  • Framing Type: Stick