This house plan comes in both this 3 bedroom version and a 4 bedroom one (house plan 42235DB). Both share the same attractive exterior with window seat bumpout adding appeal to the garage.
At under 1,400 sq. ft., this house plan is cost-effective to build. It uses simplified construction while maintaining architectural integrity.
Note the nearly complete lack of hallways. This was designed with a minimal amount of wasted space.
This open concept house plan gives you an open living room, dining room and kitchen arrangement. The result is a home that feels larger than it is.
Great attention was spent on the exterior of the home with the porch and window seat bumpout on the garage. A simplified roofline still provides optimum architectural style and impact.
Related Plan: For a 4 bedroom version, see house plan 42235DB.
Front elevation and construction notes
Rear and side elevations
Floor plan including electrical, window and door sizes, floor joist span direction and ceiling type notes (9' ceiling, vault, etc.)
Second floor plan (if applicable) with the same details as the first level floor plan
Typical wall section
Typical foundation details
Roof plan showing roof pitches, ridges and valleys, noted as 2" x 8" rafter or optional roof trusses
Foundation plan
Most plans have an optional full building section--only available upon request--at no extra cost. This section is not typically required in the US but can be a requirement in Canada
These items are NOT included:
Architectural or Engineering Stamp - handled locally if required
Site Plan - handled locally when required
Mechanical Drawings (location of heating and air equipment and duct work) - your subcontractors handle this
Plumbing Drawings (drawings showing the actual plumbing pipe sizes and locations) - your subcontractors handle this
Energy calculations - handled locally when required
Floor plan including electrical, window and door sizes, floor joist span direction and ceiling type notes (9' ceiling, vault, etc.)
Second floor plan (if applicable) with the same details as the first level floor plan
Typical wall section
Typical foundation details
Roof plan showing roof pitches, ridges and valleys, noted as 2" x 8" rafter or optional roof trusses
Foundation plan
Most plans have an optional full building section--only available upon request--at no extra cost. This section is not typically required in the US but can be a requirement in Canada
These items are NOT included:
Architectural or Engineering Stamp - handled locally if required
Site Plan - handled locally when required
Mechanical Drawings (location of heating and air equipment and duct work) - your subcontractors handle this
Plumbing Drawings (drawings showing the actual plumbing pipe sizes and locations) - your subcontractors handle this
Energy calculations - handled locally when required
Not all items qualify for discounts. Discounts are only applied to plans, not to Cost-to-Build Reports, plan options and optional foundations and some of our designers don't allow us to discount their plans.
Are you sure you want to remove this plan from your favorites?
It will be removed from all of your collections.
Price Match Guarantee
If you've found a better price, call us at 1-800-854-7852 or email us at [email protected] with the plan number, price, and where you found it for less. We will match that price and give you an additional 10% discount.
*Our Price Guarantee is limited to house plan purchases within 10 business days of your original purchase date.
×
Block / CMU (main floor)
Most concrete block (CMU) homes have 2 x 4 or 2 x 6 exterior walls on the 2nd story.