Traditional House Plan with Expansion Possibilities

Plan 44077TD

  • 3,722

    Heated s.f.

  • 4

    Beds

  • 3

    Baths

  • 2

    Stories

  • 2

    Cars

  • This is a traditional family home plan with 4 bedrooms upstairs, and large living spaces on the lower floor.
  • The exterior features stacked stone, real wood shutters, paneled columns, wrought iron railings and an architectural shingle roof.
  • There is room to expand with an unfinished basement and even a vaulted attic with numerous possibilities.
  • The 40' ridge height is to the top of the chimney. The actual height to the top of the ridge is 37'4".
  • Energy-Saving Features: R-30 roof and wall insulation, on-demand water heater in central mechanical closet.

All plans include the following:

  • Floor Plans -Views of each floor, looking down from above. They show window and door locations, room dimensions, plumbing fixture locations, etc.
  • Exterior Elevations -Flat views of the outside of the house, looking at the front, left, rear and right.
  • Building Sections -Views of the building if you were to cut through it.
  • Foundation Plan -This plan shows the location of footings and concrete slabs.
  • Floor & Roof Layouts -This plan shows the outline of the floor truss systems, and slopes, valleys, ridges and hips on the roof.
  • Wall Section -A detailed view showing how the walls are assembled.
  • Electrical Plan -Outlets, switches, lights and fans are shown on the floor plan.
  • Details & Notes -Construction notes.
These items are NOT included:

  • Architectural or Engineering Stamp - handled locally if required
  • Site Plan - handled locally when required
  • Mechanical Drawings (location of heating and air equipment and duct work) - your subcontractors handle this
  • Plumbing Drawings (drawings showing the actual plumbing pipe sizes and locations) - your subcontractors handle this
  • Energy calculations - handled locally when required

NOTE:
If you want to purchase this plan in reverse, please select "readable reverse" or "mirror reverse" under Options above.
Traditional House Plan with Expansion Possibilities - 44077TD floor plan - Main Level
NOTE:
If you want to purchase this plan in reverse, please select "readable reverse" or "mirror reverse" under Options above.
Traditional House Plan with Expansion Possibilities - 44077TD floor plan - 2nd Floor
NOTE:
If you want to purchase this plan in reverse, please select "readable reverse" or "mirror reverse" under Options above.
Traditional House Plan with Expansion Possibilities - 44077TD floor plan - Basement

Traditional House Plan with Expansion Possibilities

  • 3,722

    Heated s.f.

  • 4

    Beds

  • 3

    Baths

  • 2

    Floors

  • 2

    Car garage

Floor Plan

  • Main Level

  • 2nd Floor

  • Basement

Plan Details

Square Footage Breakdown

  • Total: 3,722 sq. ft.
  • 1st Floor: 2,033 sq. ft.
  • 2nd Floor: 1,689 sq. ft.

Dimensions

  • Width: 76' 0"
  • Depth: 96' 0"
  • Max ridge height: 40' 0"

Beds/Baths

  • Bedrooms: 4
  • Full bathrooms: 3

Garage

  • Type: Attached
  • Area: 720 sq. ft.
  • Count: 2 Cars
  • Entry Location: Courtyard

Foundation Type

    • Standard Foundations: Basement

Exterior Walls

  • Standard Type(s): 2x6

Ceiling Heights

  • Floor / Height: First Floor / 10' 0" Second Floor / 9' 0"
All house plans are copyright ©2024 by the architects and designers represented on our web site

Traditional House Plan with Expansion Possibilities

  • 3,722

    Heated s.f.

  • 4

    Beds

  • 3

    Baths

  • 2

    Floors

  • 2

    Car garage

Traditional House Plan with Expansion Possibilities

  • 3,722

    Heated s.f.

  • 4

    Beds

  • 3

    Baths

  • 2

    Floors

  • 2

    Car garage

Plan Details

Square Footage Breakdown

  • Total: 3,722 sq. ft.
  • 1st Floor: 2,033 sq. ft.
  • 2nd Floor: 1,689 sq. ft.

Dimensions

  • Width: 76' 0"
  • Depth: 96' 0"
  • Max ridge height: 40' 0"

Beds/Baths

  • Bedrooms: 4
  • Full bathrooms: 3

Garage

  • Type: Attached
  • Area: 720 sq. ft.
  • Count: 2 Cars
  • Entry Location: Courtyard

Foundation Type

    • Standard Foundations: Basement

Exterior Walls

  • Standard Type(s): 2x6

Ceiling Heights

  • Floor / Height: First Floor / 10' 0" Second Floor / 9' 0"

    Main Level

    2nd Floor

    Basement