3-Bed Traditional Craftsman House Plan with Main Level Master Suite

Plan 710367BTZ

  • 2,128

    Heated s.f.

  • 3

    Beds

  • 2.5

    Baths

  • 2

    Stories

  • Four tapered columns support the charming front porch of this 3-bedroom, traditional Craftsman house plan, clad in brick and horizontal siding.
  • From the foyer, a formal dining room is located to the right with forward-facing views. The combined kitchen and family room are situated towards the rear of the home, topped by a spacious vaulted ceiling. 
  • The kitchen island includes a double-bowl sink, and the rear wall is lined with windows, a fireplace, and an exterior door that leads to a back deck. 
  • The master suite can be found on the main level for easy access, across the hall from the laundry room. A 5-fixture bath and walk-in closet complete the space.
  • Upstairs, discover a bedroom on either side of the stairway, along with a shared bathroom with two sinks and a linen closet. An optional bonus room above the garage totals 390 sq ft and provides a space for future expansion.

The plans include the following:

  • Elevations -  at 1/4" or 3/16" and the side and rear elevations at 1/8" scale. The elevations show and note the exterior finished materials of the house.
  • Foundation - every plan is available with a walkout style basement (three masonry walls and one wood framed rear wall with windows and doors).  The basement plans are a 1/4" or 3/16" scale layout of unfinished spaces showing only the necessary 2 x 6 wood framed load bearing walls.  These plans are completed with dimensions, door/window sizes.  Crawlspace and/or slab on grade foundations are available for some plans.  
  • Floor plan - each plan consists of 1/4" or 3/16" scale layouts showing the location of 2 x 4 walls, doors, windows, plumbing fixtures, cabinetry, stairs and decorative ceilings. These plans are complete with dimensions, notes, door/window sizes and a schematic electrical layout.
  • Building sections - Take vertical cuts throughout the house and the stairs showing floor, ceiling and roof height information.
  • Floor framing - if included it shows each floor joist indicating the size, spacing and length.  All beams are sized and labeled.  Each framing plan sheet includes any framing details that are needed (tray details, connections details, etc. All framing is designed using conventional 2 x 10 floor joist or wood I-joist, depending on the span conditions of each home. FRAMING PLANS ARE NOT AVAILABLE for all home so please follow up with us for availability.
  • Ceiling framing - if included, it shows each ceiling joist indicating the size, spacing and length.  All beams are sized and labeled.  All of the joists are counted and coordinated with the material list.  FRAMING PLANS ARE NOT AVAILABLE for all home so please follow up with us for availability.
  • Roof framing - if included, shows each rafter, valley, hip and ridge indicating size, spacing and length.  All beams are sized and labeled.  All of the joists are counted and coordinated with the material list.  FRAMING PLANS ARE NOT AVAILABLE for all home so please follow up with us for availability.
  • Details sheets - shows foundation details, typical wall section and other framing details.  Also included are miscellaneous interior trim and fireplace details that can be used to customize the home. 

What is not included in the plans:

          Architectural or Engineering Stamp
          Site Plan
          Mechanical Drawings (location of heating and air equipment and duct work)
          Plumbing Drawings (drawings showing the actual plumbing pipe sizes and locations)
          Energy calculations

NOTE:
If you want to purchase this plan in reverse, please select "readable reverse" or "mirror reverse" under Options above.
3-Bed Traditional Craftsman House Plan with Main Level Master Suite - 710367BTZ floor plan - Main Level
NOTE:
If you want to purchase this plan in reverse, please select "readable reverse" or "mirror reverse" under Options above.
3-Bed Traditional Craftsman House Plan with Main Level Master Suite - 710367BTZ floor plan - 2nd Floor

3-Bed Traditional Craftsman House Plan with Main Level Master Suite

  • 2,128

    Heated s.f.

  • 3

    Beds

  • 2.5

    Baths

  • 2

    Floors

Floor Plan

  • Main Level

  • 2nd Floor

Plan Details

Square Footage Breakdown

  • Total: 2,128 sq. ft.
  • 1st Floor: 1,545 sq. ft.
  • 2nd Floor: 583 sq. ft.

Dimensions

  • Width: 42' 0"
  • Depth: 57' 9"
  • Max ridge height: 28' 6"

Beds/Baths

  • Bedrooms: 3
  • Full bathrooms: 2
  • Half bathrooms: 1

Garage

  • Type: Attached
  • Area: 479 sq. ft.

Foundation Type

    • Standard Foundations: Crawl

Exterior Walls

  • Standard Type(s): 2x4
All house plans are copyright ©2024 by the architects and designers represented on our web site

3-Bed Traditional Craftsman House Plan with Main Level Master Suite

  • 2,128

    Heated s.f.

  • 3

    Beds

  • 2.5

    Baths

  • 2

    Floors

3-Bed Traditional Craftsman House Plan with Main Level Master Suite

  • 2,128

    Heated s.f.

  • 3

    Beds

  • 2.5

    Baths

  • 2

    Floors

Plan Details

Square Footage Breakdown

  • Total: 2,128 sq. ft.
  • 1st Floor: 1,545 sq. ft.
  • 2nd Floor: 583 sq. ft.

Dimensions

  • Width: 42' 0"
  • Depth: 57' 9"
  • Max ridge height: 28' 6"

Beds/Baths

  • Bedrooms: 3
  • Full bathrooms: 2
  • Half bathrooms: 1

Garage

  • Type: Attached
  • Area: 479 sq. ft.

Foundation Type

    • Standard Foundations: Crawl

Exterior Walls

  • Standard Type(s): 2x4

    Main Level

    2nd Floor