Plan 444186GDN

Craftsman Home Plan with Angled Garage, a Study and a Bonus Room

Name: Plan 444186GDN: Craftsman Home Plan with Angled Garage, a Study and a Bonus Room
Brand: Architectural Designs
SKU: 444186GDN
Price: 1725.0 USD
Availability: InStock

Heated S.F.

2,195

Beds

3 - 4

Baths

Stories

Cars

Floor Plan

Main Level

Bonus Room

Basement Stair Location

Plan Details

This Craftsman home plan with an angled two-car garage with a large bonus room above packs four bedrooms (one can be used as a study) and loads of style into a modest footprint.
Inside, you are greeted with an an open and efficient arrangement of the great room, kitchen, and dining areas. The great room has a 14' coffered ceiling and has access to the rear porch with a cathedral ceiling.
The kitchen has a large island and easily serves the dining room. A door takes you to screen porch with fireplace for al fresco eating.
Your master suite is well separated from the secondary bedrooms and has a seating area with views to the back and a 10'5" tray ceiling. There are two walk-in closets, two vanities plus a spa tub and a walk-in shower.
Enjoy a work-from-home office by converting the front bedroom to a study.
A huge laundry room is located off the garage entry and stairs take you to the bonus room which gives you 526 square feet of expansion space.

What's Included

Cover Sheet - An artist's rendering of the exterior of the house shows you approximately how the house will look when built and landscaped
Foundation Plan - This plan gives the foundation layout, including support walls, excavated and unexcavated areas, if any, foundation notes and details, and floor framing.
Detailed Floor Plans - These plans show the layout of each floor of the house. Rooms and interior spaces are carefully dimensioned and keys are given for cross-section details provided later in the plans, as well as window and door schedules. These plans may also show the location of kitchen appliances and plumbing fixtures, and may suggest locations for electrical fixtures, switches and outlets.
Interior Elevations - The interior elevation drawings show a suggested layout design of cabinets, utility rooms, fireplaces, bookcases, built-in units and other special interior features depending on the nature and complexity of the item.
Roof Plan - The roof plan shows a bird's eye view of the overall layout of the roof, ridges, valleys, and slopes.
Exterior Elevations - Included are front, rear, left and right sides of the house. Exterior materials, details and measurements are also given.
Cross-Section / Wall Section Details - Important changes in floor, ceiling and roof heights or the relationship of one level to another are called out. Also shown, when applicable, are exterior details such as railing and banding.
Structural Plan - Overall layout and necessary details for the ceiling, second-floor framing (if applicable) and roof construction. If trusses are used, it's suggested that you use a local truss manufacturer to design your trusses to comply with your local codes and regulations.

What's Not Included

Architectural or Engineering Stamp - handled locally if required
Site Plan - handled locally when required
Mechanical Drawings (location of heating and air equipment and duct work) - your subcontractors handle this
Plumbing Drawings (drawings showing the actual plumbing pipe sizes and locations) - your subcontractors handle this
Energy calculations - handled locally when required