Plan 444227GDN

Modern Farmhouse with Home Office and Cathedral Ceilings

Name: Plan 444227GDN: Modern Farmhouse with Home Office and Cathedral Ceilings
Brand: Architectural Designs
SKU: 444227GDN
Price: 1725.0 USD
Availability: InStock

Heated S.F.

2,301

Beds

3 - 4

Baths

2.5 - 3.5

Stories

1-2

Cars

Floor Plan

Main Level

Bonus Room

Plan Details

This modern farmhouse design has a beautiful exterior with board and batten siding and a standing seam metal roof over the front porch, home office and garage windows. A 2-car side-entry garage helps contribute to the curb appeal.
An open floor plan greets you as you enter off the front porch. A column divides the dining room from the great room, leaving the entire area from the kitchen to the fireplace and foyer free of any walls.
A cathedral ceiling tops the great room and island kitchen, visually expanding the open living space. A large walk-in pantry is steps away from your food prep.
The master suite has views to the back and cathedral ceilings in the bedroom. A sun tunnel in the walk-in closet helps draw in natural light and having direct laundry access from the suite is a nice convenience.
Across the home, two bedrooms share a bath. Use the front one as your home office and escape the commute.
Stairs take you to 592 square feet of expansion space above the garage. There's a full bath giving you the potential to use this as a bedroom.

What's Included

Cover Sheet - An artist's rendering of the exterior of the house shows you approximately how the house will look when built and landscaped
Foundation Plan - This plan gives the foundation layout, including support walls, excavated and unexcavated areas, if any, foundation notes and details, and floor framing.
Detailed Floor Plans - These plans show the layout of each floor of the house. Rooms and interior spaces are carefully dimensioned and keys are given for cross-section details provided later in the plans, as well as window and door schedules. These plans may also show the location of kitchen appliances and plumbing fixtures, and may suggest locations for electrical fixtures, switches and outlets.
Interior Elevations - The interior elevation drawings show a suggested layout design of cabinets, utility rooms, fireplaces, bookcases, built-in units and other special interior features depending on the nature and complexity of the item.
Roof Plan - The roof plan shows a bird's eye view of the overall layout of the roof, ridges, valleys, and slopes.
Exterior Elevations - Included are front, rear, left and right sides of the house. Exterior materials, details and measurements are also given.
Cross-Section / Wall Section Details - Important changes in floor, ceiling and roof heights or the relationship of one level to another are called out. Also shown, when applicable, are exterior details such as railing and banding.
Structural Plan - Overall layout and necessary details for the ceiling, second-floor framing (if applicable) and roof construction. If trusses are used, it's suggested that you use a local truss manufacturer to design your trusses to comply with your local codes and regulations.

What's Not Included

Architectural or Engineering Stamp - handled locally if required
Site Plan - handled locally when required
Mechanical Drawings (location of heating and air equipment and duct work) - your subcontractors handle this
Plumbing Drawings (drawings showing the actual plumbing pipe sizes and locations) - your subcontractors handle this
Energy calculations - handled locally when required