Plan 69862AM

Modern Farmhouse with Attached 729 Square Foot ADU Apartment - 3282 Sq Ft

Name: Plan 69862AM: Modern Farmhouse with Attached 729 Square Foot ADU Apartment - 3282 Sq Ft
Brand: Architectural Designs
SKU: 69862AM
Price: 2089.0 USD
Availability: InStock

Heated S.F.

3,282

Beds

Baths

3.5

Stories

Cars

Floor Plan

Main Level

Plan Details

This modern farmhouse plan gives you 3,282 square feet of heated living space which includes a 729 square foot attached ADU suite. Your family of 3 can enjoy the live-in company of an extended family member or long-term guest in their fully-functioning apartment and their company as they have direct access to the main home from their guest foyer.
The main home has a 163 square foot front porch and the apartment has its own 88 square foot one. The main entry leads into a foyer with a coat closet on the left and a home office on the right. Views extend through the vaulted great room and onto the vaulted outdoor living space from the entry.
The great room fireplace is surrounded by built-ins and the adjoining kitchen features a good-size island and neighboring dining nook with built-ins.
The master suite occupies the right side of the home, and boasts a spa-like bath with a freestanding tub as the focal point. Direct access to the laundry room from the walk-in closet is a nice convenience. Bedrooms 2 and 3 are located on the opposite side of the home, and share a bath.
A mudroom with a built-in bench, coat closet, and powder bath resides just inside from the 2-car side-entry garage.
Related Plan: Eliminate the ADU apartment and shrink the footprint accordingly by 22' with house plan 69755AM (2,460 sq. ft.).

What's Included

Exterior Elevations: In addition to the front exterior, your drawing set will include drawings of the rear and sides of your house as well. These drawings give notes on exterior materials and finishes. Particular attention is given to cornice detail, brick and stone accents, or other finish items that make your home unique.
Foundation Plan: The foundation page dimensions, concrete walls, footings, pads, posts, beams, bearing walls, and any stepped foundation information along with any retaining wall info (schematic only). A typical wall section for the home is also usually included on this page (if not, it is elsewhere in your plan set, as space allows). If your plan features a poured concrete slab rather than a basement or crawlspace, the foundation page shows footings and details for the slab, and includes plumbing locations.
Floor Plan(s): Exterior and interior wall framing, and windows/doors are dimensioned. Room sizes are indicated and any beams, posts and structural bearing points are called out. The floor plans include an electrical legend, and electrical fittings, lights and outlets are shown. Floor Plans will also indicate cross–section details (provided on the sections page) and show any special framing details applicable to the design. Cabinet elevations are included for kitchen and bathrooms; some designs feature cabinet elevations for design–related built–ins too.
Building Sections: Building sections show changes in floor, ceiling, or roof height, and the relationship of one level to another. Our section pages also show how the stairs are calculated (if there are some!) and depict roof and foundation members. We try and draw sections to show the most useful information — choosing locations where there are elements you or your contractor might need clarification on.
IMPORTANT NOTE: Sections and elevations depict the standard foundation only.
Roof Plan: Roof framing or truss directions are shown, slope directions are indicated and structural members are sized and called out if applicable. The gravity loads used to calculate the rafters, beams and posts are indicated , and we also show gutters, downspouts, and any roof venting required for your home.
Notes and Details Page(s): Your home comes detailed to meet the requirements of the latest adopted version of the ‘International Residential Code’, and our notes and details pages outline all the elements applicable to the design of your home. Compliance with further standards may need to be incorporated into your plan set, depending on the requirements of your building department — these are usually done locally.

View Sample Plan

What's Not Included

Architectural or Engineering Stamp - handled locally if required
Site Plan - handled locally when required
Mechanical Drawings (location of heating and air equipment and duct work) - your subcontractors handle this
Plumbing Drawings (drawings showing the actual plumbing pipe sizes and locations) - your subcontractors handle this
Energy calculations - handled locally when required