Plan 710407BTZ Traditional Craftsman Home Plan with Main-level Master Suite and Loft

Traditional Craftsman Home Plan with Main-level Master Suite and Loft

Plan 710407BTZ

  • 2,780

    Heated s.f.

  • 3

    Beds

  • 3.5

    Baths

  • 2

    Stories

  • 2

    Cars

  • This Traditional Craftsman home plan fits easily into a narrow lot and presents four tapered columns above brick bases as support for the charming front porch.
  • Inside, the kitchen takes center stage, and rightfully so; the long snack bar offers plenty of room for entertaining guests or serving quick meals, and the openness to the cozy grand room encourages easy conversation and movement.
  • A formal dining room near the foyer awaits elegant evenings. Later, adjourn to the large deck and covered porch off the breakfast nook.
  • The private master suite sits to the right, complete with its own foyer, walk-in closet, and large bathroom.
  • Two bedrooms upstairs have private baths and a shared loft.

The plans include the following:

  • Elevations -  at 1/4" or 3/16" and the side and rear elevations at 1/8" scale. The elevations show and note the exterior finished materials of the house.
  • Foundation - every plan is available with a walkout style basement (three masonry walls and one wood framed rear wall with windows and doors).  The basement plans are a 1/4" or 3/16" scale layout of unfinished spaces showing only the necessary 2 x 6 wood framed load bearing walls.  These plans are completed with dimensions, door/window sizes.  Crawlspace and/or slab on grade foundations are available for some plans.  
  • Floor plan - each plan consists of 1/4" or 3/16" scale layouts showing the location of 2 x 4 walls, doors, windows, plumbing fixtures, cabinetry, stairs and decorative ceilings. These plans are complete with dimensions, notes, door/window sizes and a schematic electrical layout.
  • Building sections - Take vertical cuts throughout the house and the stairs showing floor, ceiling and roof height information.
  • Floor framing - if included it shows each floor joist indicating the size, spacing and length.  All beams are sized and labeled.  Each framing plan sheet includes any framing details that are needed (tray details, connections details, etc. All framing is designed using conventional 2 x 10 floor joist or wood I-joist, depending on the span conditions of each home. FRAMING PLANS ARE NOT AVAILABLE for all home so please follow up with us for availability.
  • Ceiling framing - if included, it shows each ceiling joist indicating the size, spacing and length.  All beams are sized and labeled.  All of the joists are counted and coordinated with the material list.  FRAMING PLANS ARE NOT AVAILABLE for all home so please follow up with us for availability.
  • Roof framing - if included, shows each rafter, valley, hip and ridge indicating size, spacing and length.  All beams are sized and labeled.  All of the joists are counted and coordinated with the material list.  FRAMING PLANS ARE NOT AVAILABLE for all home so please follow up with us for availability.
  • Details sheets - shows foundation details, typical wall section and other framing details.  Also included are miscellaneous interior trim and fireplace details that can be used to customize the home. 

What is not included in the plans:

          Architectural or Engineering Stamp
          Site Plan
          Mechanical Drawings (location of heating and air equipment and duct work)
          Plumbing Drawings (drawings showing the actual plumbing pipe sizes and locations)
          Energy calculations

Floor Plan

NOTE:
If you want to purchase this plan in reverse, please select "readable reverse" or "mirror reverse" under Options above.
Traditional Craftsman Home Plan with Main-level Master Suite and Loft - 710407BTZ floor plan - Main Level
NOTE:
If you want to purchase this plan in reverse, please select "readable reverse" or "mirror reverse" under Options above.
Traditional Craftsman Home Plan with Main-level Master Suite and Loft - 710407BTZ floor plan - 2nd Floor

Plan details

Traditional Craftsman Home Plan with Main-level Master Suite and Loft

  • 2,780

    Heated s.f.

  • 3

    Beds

  • 4

    Baths

  • 2

    Floors

  • 2

    Car garage

Buy This Plan
  • 5 Sets $1,375
  • 8 Sets $1,475
  • PDF - Unlimited Build $1,620
  • CAD - Unlimited Build $3,090
  • View all purchase option online

About This Plan

  • This Traditional Craftsman home plan fits easily into a narrow lot and presents four tapered columns above brick bases as support for the charming front porch.
  • Inside, the kitchen takes center stage, and rightfully so; the long snack bar offers plenty of room for entertaining guests or serving quick meals, and the openness to the cozy grand room encourages easy conversation and movement.
  • A formal dining room near the foyer awaits elegant evenings. Later, adjourn to the large deck and covered porch off the breakfast nook.
  • The private master suite sits to the right, complete with its own foyer, walk-in closet, and large bathroom.
  • Two bedrooms upstairs have private baths and a shared loft.

Floor Plans

  • Main Level

  • 2nd Floor

Plan Details

Square Footage Breakdown

  • Total Heated Area: 2,780 sq. ft.
  • 1st Floor: 1,777 sq. ft.
  • 2nd Floor: 1,003 sq. ft.
  • Basement Unfinished: 1,661 sq. ft.

Beds/Baths

  • Bedrooms: 3
  • Full bathrooms: 3
  • Half bathrooms: 1

Foundation Type

    • Standard Foundations: Crawl, Slab, Walkout

Exterior Walls

  • Standard Type(s): 2x4

Dimensions

  • Width: 40' 0"
  • Depth: 77' 0"
  • Max ridge height: 35' 0"

Garage

  • Type: Attached
  • Area: 498 sq. ft.
  • Count: 2 Cars
  • Entry Location: Front

Ceiling Heights

  • Floor / Height: First Floor / 9' 0" Second Floor / 9' 0"

Roof

  • Primary Pitch: 10 on 12
  • Framing Type: Stick