Plan 65814BS

Coastal Contemporary House Plan with Four Bedrooms and Expansive Lanai

Name: Plan 65814BS: Coastal Contemporary House Plan with Four Bedrooms and Expansive Lanai
Brand: Architectural Designs
SKU: 65814BS
Price: 3070.0 USD
Availability: InStock

Heated S.F.

3,070

Beds

Baths

4.5

Stories

Cars

Floor Plan

Plan Details

This stunning coastal contemporary house plan offers 3,070 square feet of heated living space, featuring four bedrooms, four full bathrooms, a half bath, and a three-car garage.
The striking exterior showcases clean lines and stone accents, welcoming residents into a spacious foyer that sets a sophisticated tone for the entire home.
A generous open-concept layout anchors the living area, where the kitchen includes a large walk-in pantry and flows effortlessly into formal dining and casual living spaces.
The primary suite is thoughtfully positioned for privacy, offering a serene retreat that is separated from the three additional secondary bedrooms.
A dedicated library or study provides a quiet space for working from home, while an expansive lanai serves as a true outdoor oasis with a built-in kitchen and fireplace.
The design also incorporates a finished bonus room, adding versatile square footage that can easily adapt to your family's changing needs over time.

What's Included

Elevations: - Drawn at 1/8″ to 1/4″ = 1’0″ Scale and Includes:

Material Labels
Floor-To-Floor Heights
Roof Slope Indicators

Floor Plans: - Drawn at 1/8″ to 1/4″ = 1’0″ Scale and Includes:

Door and Window Sizes
Completely Dimensioned Floor Plan
Room Labels and Interior Room Sizes

Electrical Layouts:

Building Section Markers
All Electrical Outlets, Fixtures and Switching

Foundation or Slab Plan: - Drawn at 1/8″ to 1/4″ = 1’0″ Scale and Includes:

Floor and Deck Joist Sizes, Spacing and Direction
Electrical Locations

Roof Design Plan: - Drawn to 1/8″ to 1/4″ = 1’0″ Scale and Includes:

All Beam and Header Heights and Locations
All Hips, Gables, Ridges and Valley
Building Section Markers

Building Sections: - Drawn to 1/8″ to 1/4″ = 1’0″ Scale and Includes:

Floor-To-Floor Heights
Non-Typical Plate Heights Indicated

Typical Wall Sections: - Drawn at 1/8″ to 1/2″ = 1’0″ Scale and Includes:

All Labels Indicating Wall Construction
Foundation Wall Thickness
Insulation Type and Thickness

Miscellaneous Notes and Details:

Miscellaneous General Notes
Stairway Details (if applicable)

What's Not Included

Architectural or Engineering Stamp - handled locally, or use our structural engineering service if required
Site Plan - handled locally when required
Mechanical Drawings (location of heating and air equipment and duct work) - your subcontractors handle this
Plumbing Drawings (drawings showing the actual plumbing pipe sizes and locations) - your subcontractors handle this
Energy calculations - handled locally when required

IMPORTANT NOTE: Structural drawings, as well as heating and plumbing details, will not be included in your plan sets due to a variety of factors which include local codes, installation methods, personal preference, etc. Your building professional (contractor/builder/supplier) can, without difficulty, supply these details and specifications on your behalf.