Plan 65805BS

Contemporary Florida Style House Plan with 3 Bedrooms and 3-Car Garage

Name: Plan 65805BS: Contemporary Florida Style House Plan with 3 Bedrooms and 3-Car Garage
Brand: Architectural Designs
SKU: 65805BS
Price: 1898.01 USD
Availability: InStock

Heated S.F.

2,627

Beds

Baths

3.5

Stories

Cars

Floor Plan

Plan Details

This modern 2,627 square foot Florida-style residence offers 3 bedrooms, 3.5 bathrooms, and a spacious 724 square foot 3-car garage.
The striking exterior features clean lines and stone accents that create a sophisticated arrival experience through a private courtyard entry.
Inside, the open-concept layout flows effortlessly from the foyer into the main living areas, where floor-to-ceiling windows flood the space with natural light.
A gourmet kitchen serves as the heart of the home, complete with a breakfast nook that overlooks the expansive 567 square foot lanai.
The primary suite is thoughtfully positioned for maximum privacy and features a luxurious spa-like bath, while two additional bedrooms are clustered nearby to provide convenience for family or guests.
Large glass sliding doors connect the indoor living areas to the massive covered lanai, offering a seamless transition for outdoor dining and relaxing in the fresh air.

What's Included

Elevations: - Drawn at 1/8″ to 1/4″ = 1’0″ Scale and Includes:

Material Labels
Floor-To-Floor Heights
Roof Slope Indicators

Floor Plans: - Drawn at 1/8″ to 1/4″ = 1’0″ Scale and Includes:

Door and Window Sizes
Completely Dimensioned Floor Plan
Room Labels and Interior Room Sizes

Electrical Layouts:

Building Section Markers
All Electrical Outlets, Fixtures and Switching

Foundation or Slab Plan: - Drawn at 1/8″ to 1/4″ = 1’0″ Scale and Includes:

Floor and Deck Joist Sizes, Spacing and Direction
Electrical Locations

Roof Design Plan: - Drawn to 1/8″ to 1/4″ = 1’0″ Scale and Includes:

All Beam and Header Heights and Locations
All Hips, Gables, Ridges and Valley
Building Section Markers

Building Sections: - Drawn to 1/8″ to 1/4″ = 1’0″ Scale and Includes:

Floor-To-Floor Heights
Non-Typical Plate Heights Indicated

Typical Wall Sections: - Drawn at 1/8″ to 1/2″ = 1’0″ Scale and Includes:

All Labels Indicating Wall Construction
Foundation Wall Thickness
Insulation Type and Thickness

Miscellaneous Notes and Details:

Miscellaneous General Notes
Stairway Details (if applicable)

What's Not Included

Architectural or Engineering Stamp - handled locally, or use our structural engineering service if required
Site Plan - handled locally when required
Mechanical Drawings (location of heating and air equipment and duct work) - your subcontractors handle this
Plumbing Drawings (drawings showing the actual plumbing pipe sizes and locations) - your subcontractors handle this
Energy calculations - handled locally when required

IMPORTANT NOTE: Structural drawings, as well as heating and plumbing details, will not be included in your plan sets due to a variety of factors which include local codes, installation methods, personal preference, etc. Your building professional (contractor/builder/supplier) can, without difficulty, supply these details and specifications on your behalf.