Plan 65687BS

Mediterranean-style Southern Home Plan with Ample Storage and Indoor Outdoor Living

Name: Plan 65687BS: Mediterranean-style Southern Home Plan with Ample Storage and Indoor Outdoor Living
Brand: Architectural Designs
SKU: 65687BS
Price: 3613.0 USD
Availability: InStock

Heated S.F.

3,613

Beds

Baths

4.5

Stories

Cars

Floor Plan

Main Level

2nd Floor

3rd Floor

Plan Details

The formal entry resides in the center of this Mediterranean-style Southern home plan, framed by a double and single garage bay, which shares the lower level with an enormous storage area.
Stairs or an elevator will guide you to the main level, where a spacious great room greets you with a sliding door that consumes the rear wall and retracts for indoor outdoor living.
Easily move between the great room and kitchen, which features a large island, walk-in pantry, and adjacent laundry room for multi-tasking.
The master suite occupies the left side of the main level and provides access to the covered porch, along with two walk-in closets and a deluxe 5-fixture ensuite. Another bedroom suite and a quiet study complete the main level.
Upstairs, two identical bedrooms can be found next to a loft with a breakfast bar. Each bedroom includes a full bath and access to a rear-facing balcony.
BUILDING RESTRICTION: Restrictions may apply if building in Lee and Collier Counties, Florida as well as Sarasota, Florida. Please contact us with your site address to confirm.

What's Included

Elevations: - Drawn at 1/8″ to 1/4″ = 1’0″ Scale and Includes:

Material Labels
Floor-To-Floor Heights
Roof Slope Indicators

Floor Plans: - Drawn at 1/8″ to 1/4″ = 1’0″ Scale and Includes:

Door and Window Sizes
Completely Dimensioned Floor Plan
Room Labels and Interior Room Sizes

Electrical Layouts:

Building Section Markers
All Electrical Outlets, Fixtures and Switching

Foundation or Slab Plan: - Drawn at 1/8″ to 1/4″ = 1’0″ Scale and Includes:

Floor and Deck Joist Sizes, Spacing and Direction
Electrical Locations

Roof Design Plan: - Drawn to 1/8″ to 1/4″ = 1’0″ Scale and Includes:

All Beam and Header Heights and Locations
All Hips, Gables, Ridges and Valley
Building Section Markers

Building Sections: - Drawn to 1/8″ to 1/4″ = 1’0″ Scale and Includes:

Floor-To-Floor Heights
Non-Typical Plate Heights Indicated

Typical Wall Sections: - Drawn at 1/8″ to 1/2″ = 1’0″ Scale and Includes:

All Labels Indicating Wall Construction
Foundation Wall Thickness
Insulation Type and Thickness

Miscellaneous Notes and Details:

Miscellaneous General Notes
Stairway Details (if applicable)

What's Not Included

Architectural or Engineering Stamp - handled locally if required
Site Plan - handled locally when required
Mechanical Drawings (location of heating and air equipment and duct work) - your subcontractors handle this
Plumbing Drawings (drawings showing the actual plumbing pipe sizes and locations) - your subcontractors handle this
Energy calculations - handled locally when required

IMPORTANT NOTE: Structural drawings, as well as heating and plumbing details, will not be included in your plan sets due to a variety of factors which include local codes, installation methods, personal preference, etc. Your building professional (contractor/builder/supplier) can, without difficulty, supply these details and specifications on your behalf.