Plan 65682BS

Modern Two-level Home Plan with Second-level Kitchenette

Name: Plan 65682BS: Modern Two-level Home Plan with Second-level Kitchenette
Brand: Architectural Designs
SKU: 65682BS
Price: 2974.0 USD
Availability: InStock

Heated S.F.

2,874

Beds

Baths

6.5+

Stories

Floor Plan

Main Level

2nd Floor

Plan Details

This modern two-level home plan, wrapped in stucco with a ribbed metal roof, delivers six bedrooms spread out between the floors, along with a kitchenette on the second level.
The great room is located in the center of the main floor and opens to the kitchen. A covered lanai can be accessed from the great room and provides a great place for a BBQ.
The laundry closet is conveniently tucked beneath the stairwell near the garage entrance.
The owner's suite is located behind the 2-car garage and includes a full bathroom with a walk-in closet. A second bedroom completes the main level.
Upstairs, you will find four bedroom suites that wrap around a kitchenette. The rear-facing bedrooms each have access to the covered balcony or terrace.
BUILDING RESTRICTION: Restrictions may apply if building in Lee and Collier Counties, Florida as well as Sarasota, Florida.

What's Included

Elevations: - Drawn at 1/8″ to 1/4″ = 1’0″ Scale and Includes:

Material Labels
Floor-To-Floor Heights
Roof Slope Indicators

Floor Plans: - Drawn at 1/8″ to 1/4″ = 1’0″ Scale and Includes:

Door and Window Sizes
Completely Dimensioned Floor Plan
Room Labels and Interior Room Sizes

Electrical Layouts:

Building Section Markers
All Electrical Outlets, Fixtures and Switching

Foundation or Slab Plan: - Drawn at 1/8″ to 1/4″ = 1’0″ Scale and Includes:

Floor and Deck Joist Sizes, Spacing and Direction
Electrical Locations

Roof Design Plan: - Drawn to 1/8″ to 1/4″ = 1’0″ Scale and Includes:

All Beam and Header Heights and Locations
All Hips, Gables, Ridges and Valley
Building Section Markers

Building Sections: - Drawn to 1/8″ to 1/4″ = 1’0″ Scale and Includes:

Floor-To-Floor Heights
Non-Typical Plate Heights Indicated

Typical Wall Sections: - Drawn at 1/8″ to 1/2″ = 1’0″ Scale and Includes:

All Labels Indicating Wall Construction
Foundation Wall Thickness
Insulation Type and Thickness

Miscellaneous Notes and Details:

Miscellaneous General Notes
Stairway Details (if applicable)

What's Not Included

Architectural or Engineering Stamp - handled locally if required
Site Plan - handled locally when required
Mechanical Drawings (location of heating and air equipment and duct work) - your subcontractors handle this
Plumbing Drawings (drawings showing the actual plumbing pipe sizes and locations) - your subcontractors handle this
Energy calculations - handled locally when required

IMPORTANT NOTE: Structural drawings, as well as heating and plumbing details, will not be included in your plan sets due to a variety of factors which include local codes, installation methods, personal preference, etc. Your building professional (contractor/builder/supplier) can, without difficulty, supply these details and specifications on your behalf.