Plan 65743BS

Transitional Florida Home Plan with European Influences

Name: Plan 65743BS: Transitional Florida Home Plan with European Influences
Brand: Architectural Designs
SKU: 65743BS
Price: 3823.0 USD
Availability: InStock

Heated S.F.

3,823

Beds

3 - 4

Baths

4.5

Stories

Cars

Floor Plan

Main Level

Plan Details

This Transitional Florida home plan makes a statement in any neighborhood with its bracketed eaves and modern metal roof adding to the overall curb appeal.
Inside, the great room greets you at the foyer with a grand vaulted ceiling that carries through to the covered lanai. Move easily into the open kitchen and dining area and discover a wine room ready to store your collection.
Entertain with ease on the covered lanai with its summer kitchen, lounge and dining areas, and a double-sided fireplace.
The left wing is where you will find a quiet study, along with the deluxe master suite, which boasts french doors to the lanai, two walk-in closets, and an oversized shower in the ensuite.
Behind the 3-car garage resides two family bedroom suites, each with their own walk-in closet, as well as a rec room (or 4th bedroom).
BUILDING RESTRICTION: Restrictions may apply if building in Lee and Collier Counties, Florida as well as Sarasota, Florida. Please contact us with your site address to confirm.

What's Included

Elevations: - Drawn at 1/8″ to 1/4″ = 1’0″ Scale and Includes:

Material Labels
Floor-To-Floor Heights
Roof Slope Indicators

Floor Plans: - Drawn at 1/8″ to 1/4″ = 1’0″ Scale and Includes:

Door and Window Sizes
Completely Dimensioned Floor Plan
Room Labels and Interior Room Sizes

Electrical Layouts:

Building Section Markers
All Electrical Outlets, Fixtures and Switching

Foundation or Slab Plan: - Drawn at 1/8″ to 1/4″ = 1’0″ Scale and Includes:

Floor and Deck Joist Sizes, Spacing and Direction
Electrical Locations

Roof Design Plan: - Drawn to 1/8″ to 1/4″ = 1’0″ Scale and Includes:

All Beam and Header Heights and Locations
All Hips, Gables, Ridges and Valley
Building Section Markers

Building Sections: - Drawn to 1/8″ to 1/4″ = 1’0″ Scale and Includes:

Floor-To-Floor Heights
Non-Typical Plate Heights Indicated

Typical Wall Sections: - Drawn at 1/8″ to 1/2″ = 1’0″ Scale and Includes:

All Labels Indicating Wall Construction
Foundation Wall Thickness
Insulation Type and Thickness

Miscellaneous Notes and Details:

Miscellaneous General Notes
Stairway Details (if applicable)

What's Not Included

Architectural or Engineering Stamp - handled locally if required
Site Plan - handled locally when required
Mechanical Drawings (location of heating and air equipment and duct work) - your subcontractors handle this
Plumbing Drawings (drawings showing the actual plumbing pipe sizes and locations) - your subcontractors handle this
Energy calculations - handled locally when required

IMPORTANT NOTE: Structural drawings, as well as heating and plumbing details, will not be included in your plan sets due to a variety of factors which include local codes, installation methods, personal preference, etc. Your building professional (contractor/builder/supplier) can, without difficulty, supply these details and specifications on your behalf.