Plan 65708BS

4-Bed Transitional Florida House Plan with Study and Split-bed Layout

Name: Plan 65708BS: 4-Bed Transitional Florida House Plan with Study and Split-bed Layout
Brand: Architectural Designs
SKU: 65708BS
Price: 2367.63 USD
Availability: InStock

Heated S.F.

3,277

Beds

Baths

Stories

Cars

Floor Plan

Main Level

Plan Details

This 4-bedroom, Transitional Florida house plan presents an intuitive flow that highlights the shared living spaces in the center with easy access to the rear covered porch that spans the width of the home.
A formal dining room sits to the left of the foyer, across from a quiet study behind french doors.
Move easily around the kitchen, where you'll find a large island, walk-in pantry, and adjoining breakfast nook with an oversized picture window.
The master suite is privately situated on the right side of the design with two walk-in closets framing the hallway that leads to the 5-fixture bathroom.
Three bedrooms are in line with the 3-car garage on the left side of the design; two include full bathrooms.
BUILDING RESTRICTION: Restrictions may apply if building in Lee and Collier Counties, Florida as well as Sarasota, Florida. Please contact us with your site address to confirm.

What's Included

Elevations: - Drawn at 1/8″ to 1/4″ = 1’0″ Scale and Includes:

Material Labels
Floor-To-Floor Heights
Roof Slope Indicators

Floor Plans: - Drawn at 1/8″ to 1/4″ = 1’0″ Scale and Includes:

Door and Window Sizes
Completely Dimensioned Floor Plan
Room Labels and Interior Room Sizes

Electrical Layouts:

Building Section Markers
All Electrical Outlets, Fixtures and Switching

Foundation or Slab Plan: - Drawn at 1/8″ to 1/4″ = 1’0″ Scale and Includes:

Floor and Deck Joist Sizes, Spacing and Direction
Electrical Locations

Roof Design Plan: - Drawn to 1/8″ to 1/4″ = 1’0″ Scale and Includes:

All Beam and Header Heights and Locations
All Hips, Gables, Ridges and Valley
Building Section Markers

Building Sections: - Drawn to 1/8″ to 1/4″ = 1’0″ Scale and Includes:

Floor-To-Floor Heights
Non-Typical Plate Heights Indicated

Typical Wall Sections: - Drawn at 1/8″ to 1/2″ = 1’0″ Scale and Includes:

All Labels Indicating Wall Construction
Foundation Wall Thickness
Insulation Type and Thickness

Miscellaneous Notes and Details:

Miscellaneous General Notes
Stairway Details (if applicable)

What's Not Included

Architectural or Engineering Stamp - handled locally if required
Site Plan - handled locally when required
Mechanical Drawings (location of heating and air equipment and duct work) - your subcontractors handle this
Plumbing Drawings (drawings showing the actual plumbing pipe sizes and locations) - your subcontractors handle this
Energy calculations - handled locally when required

IMPORTANT NOTE: Structural drawings, as well as heating and plumbing details, will not be included in your plan sets due to a variety of factors which include local codes, installation methods, personal preference, etc. Your building professional (contractor/builder/supplier) can, without difficulty, supply these details and specifications on your behalf.