Plan 69390AM

Back to Back Plans with 3 Bedrooms

Pageloader

Back to Back Plans with 3 Bedrooms

Plan 69390AM

  • 2,950

    Heated s.f.

  • 2

    Units

  • 58' 0"

    Width

  • 45' 0"

    Depth

  • Back-to-back plans combine to make this charming duplex design - build just the two, or combine several for an entire neighborhood of multi-family homes. Each offers a floor plan filled with amenities and fine detail. Begin with the single-garage, which opens to the main entry hall. It holds a den with double-door entry, the second-level stairway and a closet.
  • Living and dining areas are at the back and include a U-shaped kitchen with walk-in pantry, a living room with fireplace and built-ins and a dining space with access to a covered porch. Note the half-bath across from the kitchen.
  • Three bedrooms are found upstairs: a vaulted master suite with grand bath and walk-in closet and two family bedrooms sharing a full bath. Notice that the laundry is also on the upper level for convenience. It allows access to attic storage.

Exterior Elevations: In addition to the front exterior, your drawing set will include drawings of the rear and sides of your house as well. These drawings give notes on exterior materials and finishes. Particular attention is given to cornice detail, brick and stone accents, or other finish items that make your home unique.

Foundation Plan: The foundation page dimensions, concrete walls, footings, pads, posts, beams, bearing walls, and any stepped foundation information along with any retaining wall info (schematic only). A typical wall section for the home is also usually included on this page (if not, it is elsewhere in your plan set, as space allows). If your plan features a poured concrete slab rather than a basement or crawlspace, the foundation page shows footings and details for the slab, and includes plumbing locations.

Floor Plan(s): Exterior and interior wall framing, and windows/doors are dimensioned. Room sizes are indicated and any beams, posts and structural bearing points are called out. The floor plans include an electrical legend, and electrical fittings, lights and outlets are shown. Floor Plans will also indicate cross–section details (provided on the sections page) and show any special framing details applicable to the design. Cabinet elevations are included for kitchen and bathrooms; some designs feature cabinet elevations for design–related built–ins too.

Building Sections: Building sections show changes in floor, ceiling, or roof height, and the relationship of one level to another. Our section pages also show how the stairs are calculated (if there are some!) and depict roof and foundation members. We try and draw sections to show the most useful information — choosing locations where there are elements you or your contractor might need clarification on. 

IMPORTANT NOTE:  Sections and elevations depict the standard foundation only. 

Roof Plan: Roof framing or truss directions are shown, slope directions are indicated and structural members are sized and called out if applicable. The gravity loads used to calculate the rafters, beams and posts are indicated , and we also show gutters, downspouts, and any roof venting required for your home.

Notes and Details Page(s): Your home comes detailed to meet the requirements of the latest adopted version of the ‘International Residential Code’, and our notes and details pages outline all the elements applicable to the design of your home. Compliance with further standards may need to be incorporated into your plan set, depending on the requirements of your building department — these are usually done locally.

Floor Plan

Plan details

 

Back to Back Plans with 3 Bedrooms

  • 2,950

    Heated s.f.

  • 2

    Units

  • 58' 0"

    Width

  • 45' 0"

    Depth

Buy This Plan
  • Digital Study Set $1,296
  • PDF - single-use $1,646
  • 5 Sets $1,796
  • 5 Sets PLUS $1,846
  • CAD - multi-use $3,292
  • View all purchase option online

About This Plan

  • Back-to-back plans combine to make this charming duplex design - build just the two, or combine several for an entire neighborhood of multi-family homes. Each offers a floor plan filled with amenities and fine detail. Begin with the single-garage, which opens to the main entry hall. It holds a den with double-door entry, the second-level stairway and a closet.
  • Living and dining areas are at the back and include a U-shaped kitchen with walk-in pantry, a living room with fireplace and built-ins and a dining space with access to a covered porch. Note the half-bath across from the kitchen.
  • Three bedrooms are found upstairs: a vaulted master suite with grand bath and walk-in closet and two family bedrooms sharing a full bath. Notice that the laundry is also on the upper level for convenience. It allows access to attic storage.

Floor Plans

  • Main Level

  • 2nd Floor

Plan Details

Square Footage Breakdown

  • Total Heated Area: 2,950 sq. ft.
  • 1st Floor: 1,446 sq. ft.
  • 2nd Floor: 1,504 sq. ft.

Beds/Baths

  • Bedrooms: 6
  • Full bathrooms: 4
  • Half bathrooms: 2

Foundation Type

    • Standard Foundations: Crawl
    • Optional Foundations: Basement, Slab

Exterior Walls

  • Standard Type(s): 2x6

Dimensions

  • Width: 58' 0"
  • Depth: 45' 0"
  • Max ridge height: 26' 4"

Garage

  • Type: Attached
  • Area: 468 sq. ft.
  • Count: 2 Cars
  • Entry Location: Front

Roof

  • Framing Type: Truss
Pageloader