Plan 65731BS

Contemporary Beach Home Plan with Wine Room and Study

Name: Plan 65731BS: Contemporary Beach Home Plan with Wine Room and Study
Brand: Architectural Designs
SKU: 65731BS
Price: 4530.0 USD
Availability: InStock

Heated S.F.

4,530

Beds

Baths

4.5

Stories

Cars

Floor Plan

Main Level

Plan Details

An abundance of windows is met with a stucco-textured facade to form this Contemporary Beach home plan.
Retractable rear walls made of glass create a true indoor outdoor living experience, and the kitchen boasts an enormous island with an eating bar, large range, and walk-in pantry.
The master suite occupies the left side of the home and delivers a sitting area, two walk-in closets, and a freestanding tub in front of the custom shower in the attached bath.
A generous bonus room (included in the square footage) is attached to the rear of the home with easy access to the covered lanai.
Three additional bedrooms are sprinkled throughout the design, along with a glass wine room off the foyer, and 4-car garage for the car enthusiast.
BUILDING RESTRICTION: Restrictions may apply if building in Lee and Collier Counties, Florida as well as Sarasota, Florida. Please contact us with your site address to confirm.

What's Included

Elevations: - Drawn at 1/8″ to 1/4″ = 1’0″ Scale and Includes:

Material Labels
Floor-To-Floor Heights
Roof Slope Indicators

Floor Plans: - Drawn at 1/8″ to 1/4″ = 1’0″ Scale and Includes:

Door and Window Sizes
Completely Dimensioned Floor Plan
Room Labels and Interior Room Sizes

Electrical Layouts:

Building Section Markers
All Electrical Outlets, Fixtures and Switching

Foundation or Slab Plan: - Drawn at 1/8″ to 1/4″ = 1’0″ Scale and Includes:

Floor and Deck Joist Sizes, Spacing and Direction
Electrical Locations

Roof Design Plan: - Drawn to 1/8″ to 1/4″ = 1’0″ Scale and Includes:

All Beam and Header Heights and Locations
All Hips, Gables, Ridges and Valley
Building Section Markers

Building Sections: - Drawn to 1/8″ to 1/4″ = 1’0″ Scale and Includes:

Floor-To-Floor Heights
Non-Typical Plate Heights Indicated

Typical Wall Sections: - Drawn at 1/8″ to 1/2″ = 1’0″ Scale and Includes:

All Labels Indicating Wall Construction
Foundation Wall Thickness
Insulation Type and Thickness

Miscellaneous Notes and Details:

Miscellaneous General Notes
Stairway Details (if applicable)

What's Not Included

Architectural or Engineering Stamp - handled locally if required
Site Plan - handled locally when required
Mechanical Drawings (location of heating and air equipment and duct work) - your subcontractors handle this
Plumbing Drawings (drawings showing the actual plumbing pipe sizes and locations) - your subcontractors handle this
Energy calculations - handled locally when required

IMPORTANT NOTE: Structural drawings, as well as heating and plumbing details, will not be included in your plan sets due to a variety of factors which include local codes, installation methods, personal preference, etc. Your building professional (contractor/builder/supplier) can, without difficulty, supply these details and specifications on your behalf.