Plan 65623BS

Modern Florida Home Plan with Pool Courtyard

Name: Plan 65623BS: Modern Florida Home Plan with Pool Courtyard
Brand: Architectural Designs
SKU: 65623BS
Price: 3535.0 USD
Availability: InStock

Heated S.F.

3,535

Beds

Baths

4.5

Stories

Cars

Floor Plan

Main Level

Plan Details

Two gables sit on either side of a contemporary entry on this stucco-clad, Modern Florida house plan, while the u-shaped design creates the ideal space for a pool.
The open-concept living space is located to the right of the foyer, and presents a 13' coffered ceiling and seamlessly flows onto the outdoor living space.
The adjoining kitchen boasts a massive island, 6-burner range, and wine room next to the dining area.
Two bedroom suites with 10' ceilings can be found behind the double garage.
The master suite and a quiet study occupies the left wing of the home. Two walk-in closets line the hallway that leads to the 5-fixture bathroom with a freestanding tub and toilet room.
Related Plan: Get more room with house plan 65746BS.
BUILDING RESTRICTION: Restrictions may apply if building in Lee and Collier Counties, Florida as well as Sarasota, Florida. Please contact us with your site address to confirm.

What's Included

Elevations: - Drawn at 1/8″ to 1/4″ = 1’0″ Scale and Includes:

Material Labels
Floor-To-Floor Heights
Roof Slope Indicators

Floor Plans: - Drawn at 1/8″ to 1/4″ = 1’0″ Scale and Includes:

Door and Window Sizes
Completely Dimensioned Floor Plan
Room Labels and Interior Room Sizes

Electrical Layouts:

Building Section Markers
All Electrical Outlets, Fixtures and Switching

Foundation or Slab Plan: - Drawn at 1/8″ to 1/4″ = 1’0″ Scale and Includes:

Floor and Deck Joist Sizes, Spacing and Direction
Electrical Locations

Roof Design Plan: - Drawn to 1/8″ to 1/4″ = 1’0″ Scale and Includes:

All Beam and Header Heights and Locations
All Hips, Gables, Ridges and Valley
Building Section Markers

Building Sections: - Drawn to 1/8″ to 1/4″ = 1’0″ Scale and Includes:

Floor-To-Floor Heights
Non-Typical Plate Heights Indicated

Typical Wall Sections: - Drawn at 1/8″ to 1/2″ = 1’0″ Scale and Includes:

All Labels Indicating Wall Construction
Foundation Wall Thickness
Insulation Type and Thickness

Miscellaneous Notes and Details:

Miscellaneous General Notes
Stairway Details (if applicable)

What's Not Included

Architectural or Engineering Stamp - handled locally if required
Site Plan - handled locally when required
Mechanical Drawings (location of heating and air equipment and duct work) - your subcontractors handle this
Plumbing Drawings (drawings showing the actual plumbing pipe sizes and locations) - your subcontractors handle this
Energy calculations - handled locally when required

IMPORTANT NOTE: Structural drawings, as well as heating and plumbing details, will not be included in your plan sets due to a variety of factors which include local codes, installation methods, personal preference, etc. Your building professional (contractor/builder/supplier) can, without difficulty, supply these details and specifications on your behalf.