Plan 23632JD

Modern House Plan with Glass and Stone for a Rear Sloping Lot

Name: Plan 23632JD: Modern House Plan with Glass and Stone for a Rear Sloping Lot
Brand: Architectural Designs
SKU: 23632JD
Price: 2600.0 USD
Availability: InStock

Heated S.F.

4,350

Beds

3 - 5

Baths

3 - 4

Stories

Cars

Floor Plan

First Floor

Second Floor

Lower Level

Plan Details

A mixed material exterior loaded with windows greets you to this modern house plan with an open floor plan. The covered entry opens to reveal the foyer with views to the expansive great room.
The great room is open to the dining room and that is open to the kitchen. A sliding wall in the dining room leads to your outdoor patio which has a covered and an uncovered portion.
The kitchen has a large island with seating and workspace. A pantry is located nearby and gives you great storage.
A private den is located across the home. With its own full bath, this could be used as a guest bedroom.
Three bedrooms are located on the upper floor. And there is a bonus room - included in the total living area square footage - given you extra space.
The lower level gives you an extra bedroom, a large rec room and outdoor space in back.
Related Plans: Get an alternate version in reverse layout with house plan 23856JD. Eliminate the lower level with house plan 23633JD. And build over the garage with house plan 23628JD.
NOTE: Additional fees apply when building in the State of Washington. Contact us for more information.

What's Included

Cover Sheet - The cover sheet includes the general notes and building code information, design standards and structural materials specifications required to construct your home.
Schedule Sheet - The schedule sheet includes the roof and foundation ventilation schedules, insulation and vapor barrier specifications, and exhaust fan ventilation schedule.
Detail Sheet - The detail sheet shows building components at large scale as required to explain construction of footings, foundation walls, concrete slabs, framed floors and walls, posts, beams, insulation, eaves, roofs, vents, stairs, skylights, and connections.
Foundation Plan Sheet - The foundation plan sheet shows the layout of the crawl space, walk-out basement or slab foundation. The foundation plan includes all necessary notes, dimensions, concrete walls, footing pads, posts, beams, bearing walls, crawlspace vents, footing schedule, steel reinforcing, and structural information. If you require a different foundation type, please contact us for modifications to your plan.
Floor Plan Sheet - Floor plans are horizontal cuts through each floor level of the home, usually at 5' above the floor. The floor plan shows the location of interior and exterior walls, doors, windows, stairs, closets, cabinets, flooring, appliances, plumbing fixtures, fireplaces, posts and beams. Floor plans also indicate vaulted, coffered, or box beam ceilings, cased openings and areas with ceiling soffits.
Roof Framing Plan Sheet - The roof framing plan shows the geometry of the hips, ridges, valleys, dormers, roof pitches, wall and plate heights, and overhangs. The plan also shows all individual roof framing members, trusses, rafters, beams, skylights, roof vents, gutters, downspouts, skylights, bearing walls under framing members, and point loads.
Elevation Sheet - Exterior elevations show all four sides of the house, describing the roofing, siding, and trim materials, doors, windows, roof pitches, skylights, gutters, chimneys, wall heights, finish grade and overall building height.
Building Section Sheet - Building sections are vertical cuts through the house from the roof to the foundation. The sections illustrate the construction sequence from bottom to top starting with excavation, proceeding up through the foundation, drainage, wall and floor framing, stair framing, roof framing, windows, doors, venting, and exterior and interior finishes. Wall plate heights for each floor are also delineated.

View Sample Plan

What's Not Included

Electrical Plan - handled by your subcontractor to match your individual needs
Architectural or Engineering Stamp - handled locally if required
Site Plan - handled locally when required
Mechanical Drawings (location of heating and air equipment and duct work) - your subcontractors handle this
Plumbing Drawings (drawings showing the actual plumbing pipe sizes and locations) - your subcontractors handle this
Energy calculations - handled locally when required