PLAN NUMBER
23524JD

NEED HELP?
800-854-7852

About this plan What's included

Rugged Craftsman Home Plan

Plan 23524JD

2,110
Heated s.f.
4
Beds
3
Baths
2
Stories
3
Cars

This Northwest home plan has a rugged look that gives it Craftsman appeal. Only 41' wide, the narrow footprint still a spacious floor plan with an open layout.
Windows all along the back flood the main floor with light.
Four bedrooms easily fit onto the upper floor including the master suite with its private bath.
A laundry closet and loft area provide convenience and extra space.
The roof is truss construction with a 6 on 12 main pitch and 8 on 12 secondary pitch.
Related Plan: Get a 2-car garage with house plan 23492JD. And downsize with house plan 23526JD (1,915 sq. ft.).
NOTE: Additional fees apply when building in the State of Washington. Contact us for more information.

Each plan set includes the following:

Cover Sheet
The cover sheet includes the general notes and building code information, design standards and structural materials specifications required to construct your home.

Schedule Sheet
The schedule sheet includes the roof and foundation ventilation schedules, insulation and vapor barrier specifications, and exhaust fan ventilation schedule.

Detail Sheet
The detail sheet shows building components at large scale as required to explain construction of footings, foundation walls, concrete slabs, framed floors and walls, posts, beams, insulation, eaves, roofs, vents, stairs, skylights, and connections.

Foundation Plan Sheet
The foundation plan sheet shows the layout of the crawl space, walk-out basement or slab foundation. The foundation plan includes all necessary notes, dimensions, concrete walls, footing pads, posts, beams, bearing walls, crawlspace vents, footing schedule, steel reinforcing, and structural information. If you require a different foundation type, please contact us for modifications to your plan.

Floor Plan Sheet
Floor plans are horizontal cuts through each floor level of the home, usually at 5' above the floor. The floor plan shows the location of interior and exterior walls, doors, windows, stairs, closets, cabinets, flooring, appliances, plumbing fixtures, fireplaces, posts and beams. Floor plans also indicate vaulted, coffered, or box beam ceilings, cased openings and areas with ceiling soffits.

Roof Framing Plan Sheet
The roof framing plan shows the geometry of the hips, ridges, valleys, dormers, roof pitches, wall and plate heights, and overhangs. The plan also shows all individual roof framing members, trusses, rafters, beams, skylights, roof vents, gutters, downspouts, skylights, bearing walls under framing members, and point loads.

Elevation Sheet
Exterior elevations show all four sides of the house, describing the roofing, siding, and trim materials, doors, windows, roof pitches, skylights, gutters, chimneys, wall heights, finish grade and overall building height.

Building Section Sheet
Building sections are vertical cuts through the house from the roof to the foundation. The sections illustrate the construction sequence from bottom to top starting with excavation, proceeding up through the foundation, drainage, wall and floor framing, stair framing, roof framing, windows, doors, venting, and exterior and interior finishes. Wall plate heights for each floor are also delineated.

Please note that an electrical schematic is not included.

Floor Plan

Main Level

Reverse Floor Plan

Rugged Craftsman Home Plan - 23524JD floor plan - Main Level

2nd Floor

Reverse Floor Plan

Rugged Craftsman Home Plan

Plan 23524JD

Floor Plan

Main Level

2nd Floor

Plan details

Square Footage Breakdown

Beds/Baths

Foundation Type

Exterior Walls

Dimensions

Garage

Ceiling Heights

Roof Details

Architectural Style

Special features