Plan 65740BS

Contemporary One-story House Plan Suitable for a Narrow Lot

Name: Plan 65740BS: Contemporary One-story House Plan Suitable for a Narrow Lot
Brand: Architectural Designs
SKU: 65740BS
Price: 1405.26 USD
Availability: InStock

Heated S.F.

1,945

Beds

2 - 3

Baths

Stories

Cars

Floor Plan

Main Level

Plan Details

Clean lines and a flat roof add to the contemporary style of this elegant 34'6" wide house plan. Stone accents add to the curb appeal.
The formal entry sits to the left of the 2-car garage and leads you to the foyer. A room to the left can be used as a third bedroom or as a home office.
You pass the laundry and a powder rooms on the way to the main living area in back.
The shared living space is oriented to take advantage of any rearward views, and a large sliding door brings the outdoors in, while allowing access to the covered lanai.
The master bedroom also has lanai access and has two walk-in closets and a 5-fixture bath.
Bedroom 2 is tucked in the middle of the home and has its own bath.
Related Plans: Get a smaller version with a 2-car garage with house plan 65637BS and 86086BS with a 1-car garage.
BUILDING RESTRICTION: Restrictions may apply if building in Lee and Collier Counties, Florida as well as Sarasota, Florida. Please contact us with your site address to confirm.

What's Included

Elevations: - Drawn at 1/8″ to 1/4″ = 1’0″ Scale and Includes:

Material Labels
Floor-To-Floor Heights
Roof Slope Indicators

Floor Plans: - Drawn at 1/8″ to 1/4″ = 1’0″ Scale and Includes:

Door and Window Sizes
Completely Dimensioned Floor Plan
Room Labels and Interior Room Sizes

Electrical Layouts:

Building Section Markers
All Electrical Outlets, Fixtures and Switching

Foundation or Slab Plan: - Drawn at 1/8″ to 1/4″ = 1’0″ Scale and Includes:

Floor and Deck Joist Sizes, Spacing and Direction
Electrical Locations

Roof Design Plan: - Drawn to 1/8″ to 1/4″ = 1’0″ Scale and Includes:

All Beam and Header Heights and Locations
All Hips, Gables, Ridges and Valley
Building Section Markers

Building Sections: - Drawn to 1/8″ to 1/4″ = 1’0″ Scale and Includes:

Floor-To-Floor Heights
Non-Typical Plate Heights Indicated

Typical Wall Sections: - Drawn at 1/8″ to 1/2″ = 1’0″ Scale and Includes:

All Labels Indicating Wall Construction
Foundation Wall Thickness
Insulation Type and Thickness

Miscellaneous Notes and Details:

Miscellaneous General Notes
Stairway Details (if applicable)

What's Not Included

Architectural or Engineering Stamp - handled locally if required
Site Plan - handled locally when required
Mechanical Drawings (location of heating and air equipment and duct work) - your subcontractors handle this
Plumbing Drawings (drawings showing the actual plumbing pipe sizes and locations) - your subcontractors handle this
Energy calculations - handled locally when required

IMPORTANT NOTE: Structural drawings, as well as heating and plumbing details, will not be included in your plan sets due to a variety of factors which include local codes, installation methods, personal preference, etc. Your building professional (contractor/builder/supplier) can, without difficulty, supply these details and specifications on your behalf.