Plan 33239ZR 4-Bed Coastal Craftsman Home Plan with Butler's Pantry and Covered Lanai

4-Bed Coastal Craftsman Home Plan with Butler's Pantry and Covered Lanai

Plan 33239ZR

  • 3,620

    Heated s.f.

  • 4

    Beds

  • 4.5

    Baths

  • 2

    Stories

  • This 4-bedroom, coastal Craftsman home plan will stand out amongst other seaside retreats with its ribbed metal roof, board and batten siding, and grand front entry.
  • The spacious foyer with a 12' ceiling guides you into a great room filled with natural light. Coffered ceilings and a wall of built-ins give this room an air of elegance.
  • This kitchen was designed with dinner parties in mind. The large island serves as a natural gathering spot, while a sizable butler's pantry with a utility sink can be used for additional prep space.
  • The rear wall retracts for a true indoor outdoor lifestyle and the covered lanai provides a shaded retreat outdoors.
  • The owner's suite occupies the right side of the home, complete with two walk-in closets and a freestanding tub in the 5-fixture ensuite.
  • Two additional guest suites reside on the main level, while upstairs, you will find a fourth bedroom and quiet study, both with access to a covered balcony.
  • This home is an ideal candidate for a net zero home. Features built into the plan can result in a 50% savings on energy costs when compared to other new homes and a 60-70% savings when compared to older homes.

COVER SHEET – / INDEX / SITE PLAN - The Cover sheet contains an index of the sheets that will follow in the ESHP design development set of plans. It will also include a gray scale elevation or rendering depicting the look of the front of the home, and overall roof plan.

 

WALL SECTIONS -The Wall Section sheet depicts one or more sections of the home’s exterior walls from the foundation to the roof, calling out all materials and construction specifics.

FOUNDATION PLAN - The Foundation Plan sheet shows the home’s foundation layout depicting plumbing, footing, support walls, columns, etc., calling out the necessary notes, dimensions and details.

SECOND FLOOR FRAMING (where appropriate) - The Second Floor Framing sheet shows important locations of beams and load-bearing conditions, as well as the floor truss spacing and direction. The Second Floor Framing Plan is meant as general information for the truss manufacturer.

FLOOR PLANS - The Floor Plan sheet(s), show a detailed layout of the floor plans with dimensions, notes, call outs and keys relating to sheets with sections and details needed by your builder for construction. These plans will include window and door sizes and locations, and will also show the location of bathroom fixtures.

ROOF PLAN & SOFFIT (CHASE LAYOUT) PLAN - The Roof Plan sheet is a general layout of the home’s roof. It is meant as general information for the truss manufacturer and framing contractor. This sheet also contains the location and size of the dropped soffits housing the forced-air chases. (Ducts in Conditioned Space – DICS) Energy Smart Home Plans is the only design company that offers this information for those seeking truly High-Performance Homes.

REFLECTED CEILING PLAN - The reflected ceiling plan shows all ceiling heights, treatments, and details including necessary notes.

 

EXTERIOR ELEVATIONS - The Exterior Elevation sheet(s) depict elevations for all sides of the home, showing dimensions and material notes and exterior detailing where needed.

 

CROSS SECTION & INTERIOR ELEVATIONS - The Cross Section sheet depicts a section through the home revealing floor, ceiling and roof heights at a strategic location. The Interior Elevation sheet shows conceptual interior wall elevations for the Kitchen, Bathrooms, Utility Room as well as built-ins, fireplaces and other unique interior features as per design. (Interior elevations may not be available for all stock plans.)

 

ELECTRICAL PLAN - The Electrical Plan sheet shows suggested wiring and location of fixtures (lighting, ceiling fans, etc.), switches and outlets. This plan does not contain diagrams detailing how all wiring should be run, or how circuits should be engineered. Your electrician should work out these details.


These items are NOT included:

  • Architectural or Engineering Stamp - handled locally if required
  • Site Plan - handled locally when required
  • Mechanical Drawings (location of heating and air equipment and duct work) - your subcontractors handle this
  • Plumbing Drawings (drawings showing the actual plumbing pipe sizes and locations) - your subcontractors handle this
  • Energy calculations - handled locally when required

Floor Plan

NOTE:
If you want to purchase this plan in reverse, please select "readable reverse" or "mirror reverse" under Options above.
4-Bed Coastal Craftsman Home Plan with Butler's Pantry and Covered Lanai - 33239ZR floor plan - Main Level
NOTE:
If you want to purchase this plan in reverse, please select "readable reverse" or "mirror reverse" under Options above.
4-Bed Coastal Craftsman Home Plan with Butler's Pantry and Covered Lanai - 33239ZR floor plan - 2nd Floor

Plan details

4-Bed Coastal Craftsman Home Plan with Butler's Pantry and Covered Lanai

  • 3,620

    Heated s.f.

  • 4

    Beds

  • 5

    Baths

  • 2

    Floors

Buy This Plan
  • PDF - Single-Build $2,695
  • CAD - Single-Build $3,370
  • View all purchase option online

About This Plan

  • This 4-bedroom, coastal Craftsman home plan will stand out amongst other seaside retreats with its ribbed metal roof, board and batten siding, and grand front entry.
  • The spacious foyer with a 12' ceiling guides you into a great room filled with natural light. Coffered ceilings and a wall of built-ins give this room an air of elegance.
  • This kitchen was designed with dinner parties in mind. The large island serves as a natural gathering spot, while a sizable butler's pantry with a utility sink can be used for additional prep space.
  • The rear wall retracts for a true indoor outdoor lifestyle and the covered lanai provides a shaded retreat outdoors.
  • The owner's suite occupies the right side of the home, complete with two walk-in closets and a freestanding tub in the 5-fixture ensuite.
  • Two additional guest suites reside on the main level, while upstairs, you will find a fourth bedroom and quiet study, both with access to a covered balcony.
  • This home is an ideal candidate for a net zero home. Features built into the plan can result in a 50% savings on energy costs when compared to other new homes and a 60-70% savings when compared to older homes.

Floor Plans

  • Main Level

  • 2nd Floor

Plan Details

Square Footage Breakdown

  • Total Heated Area: 3,620 sq. ft.
  • 1st Floor: 2,890 sq. ft.
  • 2nd Floor: 730 sq. ft.
  • Lanai: 677 sq. ft.
  • Porch, Front: 77 sq. ft.

Beds/Baths

  • Bedrooms: 4
  • Full bathrooms: 4
  • Half bathrooms: 1

Foundation Type

    • Standard Foundations: Piling

Exterior Walls

  • Standard Type(s): Block

Dimensions

  • Width: 82' 8"
  • Depth: 62' 6"
  • Max ridge height: 27' 8"

Garage

  • Type: Attached
  • Area: 893 sq. ft.

Roof

  • Primary Pitch: 6 on 12